Dynamic fatigue testing machine
Electronic universal testing machine
Electro-hydraulic servo universal testing machine
Automated test scheme
Pendulum impact testing machine
Drop hammer impact testing machine
High temperature creep endurance testing machine
Horizontal testing machine
Special testing machine
Standard machine
Spring testing machine
Electric insulator testing machine
Fastener testing machine
Function summary
Wanji adhesive drop hammer impact testing machine is based on the development of instrument drop hammer impact testing machine,Method of cutting a high-strength adhesive between two metal sheets by dynamic impact wedges,The dynamic fracture resistance of high strength adhesive under impact condition was measured,It is a necessary testing instrument for non-metallic material manufacturers and quality inspection departments,It is also an indispensable testing instrument for research institutes to conduct new material research。
The device adopts force value sensor and test system,The high speed data acquisition card is used to measure the load transient value of the sample cutting process of the impacted wedge by the instrument sensor,That is, the force-displacement-energy curve of the impact process and the characteristic point on the curve: the maximum force Fm,Impact energy Wt and corresponding displacement,The process analysis of cutting high-strength adhesive between two metal sheets is realized,The bonding properties of adhesives under dynamic impact cutting conditions are discussed。
Meet the criteria
(1) GB/T2611-1992 "General Technical Requirements for Testing Machines"
(2) ISO 11343 《2024欧洲杯买球》
Technical parameter
型号 | DIT302Z-1 |
Impact energy | 50~300J |
Impact velocity | 2~5.5m/s |
Impact height | 0.2~1.6m |
Lifting speed | 1m/min to 3m/min adjustable continuously |
Hammer head positioning accuracy | 1mm |
Tensile dynamic sensor maximum load | 2kN |
Service temperature range | -40℃-+80℃ |
Temperature uniformity | ≤±2℃ |
Temperature deviation | ≤±2℃ |
Static linear error of tensile dynamic sensor | Full scale ±1% (10% ~ 50%FS) point by point ±2% (50% ~ 100%FS) |
A/D sampling resolution | 16bits |
Maximum sampling frequency | 2MHz |
Frequency response | 500kHz |
Experimental dynamic error | <2% |
Dimensions of testing machine | 850×1700×3300mm |
Net weight of testing machine | 1200kg |
电源 | 220V±10%, 50Hz±10%, 1.5kW |
Sweep for immediate attention
Copyright @ Shenzhen wance Test Equipment Co., Ltd. Copyright(C)2024 wance Technologies Ltd.
All Rights Reserved Guangdong ICP number 15055763